AD704SE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD704 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 2.4mA |
| Quiescent Current | 600μA |
| Slew Rate | 0.15 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00027μA |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Input Bias Current | 100pA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Length | 8.89mm |
| Width | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD704SE/883B Overview
The linear amplifier is packaged in a 20-CLCC case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. We are approaching the 20h termination of the year. It consists of a total of 20 pins in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 20 pins are included on the operational amplifiers. There is an input offset voltage of 150μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 2.4mA and 10 . The voltage gain should stay at 106.02dB. Op amp ic has 4 channels. The current is quiescent at 600μA.
AD704SE/883B Features
20 Pins
supply voltage of 15V
106.02dB voltage gain
AD704SE/883B Applications
There are a lot of Analog Devices Inc. AD704SE/883B Instrumentational OP Amps applications.
- Car stereo
- Portable docking station
- Thermocouples
- Navigation
- Radar
- Signal amplification
- Signal operation
- PDA
- Information processing
- Subtraction operation circuits
