AD706ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD706 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 1.2mA |
| Nominal Supply Current | 750μA |
| Power Dissipation | 650mW |
| Max Supply Current | 750mA |
| Quiescent Current | 600μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD706ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 1.2mA supply current, this operational amplifier ics can be operated. Maintain 126.02dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. Currently, linear amplifier is operating with a quiescent current of 600μA.
AD706ARZ Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
AD706ARZ Applications
There are a lot of Analog Devices Inc. AD706ARZ Instrumentational OP Amps applications.
- Industrial applications including automation
- Laptop
- Wireless base stations
- Biopotential
- Inverse/same-phase proportional circuit
- Weak signal detection
- Radiation thermometry transducers
- Digital cameras
- Signal operation
- Industrial control system
