AD706ARZ-REEL7
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD706 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 1.2mA |
| Power Dissipation | 650mW |
| Quiescent Current | 600μA |
| Supply Current-Max | 1.4mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
AD706ARZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 1.2mA . You should keep the voltage gain at 126.02dB for the time being. Instrumentation amplifier has 2 channels on it. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 600μA quiescent current running through op amp ic.
AD706ARZ-REEL7 Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
AD706ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD706ARZ-REEL7 Instrumentational OP Amps applications.
- Test and measurement instruments
- Automatic control
- Portable docking station
- Voltage regulation circuit
- Radar
- Portable media players
- Commercial audio systems
- High input resistance broadband
- Automation control systems
- Gaming industry
