AD706JR

2 Channels 15mA per Channel 50pA 132 dB Instrumentational OP Amps 0.0004μA 4V~36V ±2V~18V AD706 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD706JR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 856
Description: 2 Channels 15mA per Channel 50pA 132 dB Instrumentational OP Amps 0.0004μA 4V~36V ±2V~18V AD706 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	650mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD706
Pin Count	8
Number of Channels	2
Operating Supply Current	750μA
Power Dissipation	650mW
Quiescent Current	600μA
Supply Current-Max	1.4mA
Slew Rate	0.15V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	132 dB
Current - Input Bias	50pA
Voltage - Supply, Single/Dual (±)	4V~36V ±2V~18V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	30μV
Gain Bandwidth Product	800 kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	800 kHz
Voltage Gain	126.02dB
Average Bias Current-Max (IIB)	0.0004μA
Power Supply Rejection Ratio (PSRR)	110dB
Low-Offset	YES
Frequency Compensation	YES
Low-Bias	YES
Dual Supply Voltage	15V
Input Capacitance	2pF
Input Voltage Noise Density	17nV/sqrt Hz
Height Seated (Max)	1.75mm
Length	4.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

AD706JR Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. There is an input offset voltage of 30μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 750μA and 10 . There should be no change in the voltage gain at 126.02dB. As far as the device is concerned, buffer amplifier has 2 channels. As a result, linear amplifier's quiescent current is 600μA.