AD706JRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD706 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 1.2mA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 650mW |
| Output Current | 15mA |
| Quiescent Current | 600μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 50pA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 15mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD706JRZ Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 100μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 1.2mA . It is recommended to keep the voltage gain at 126.02dB at all times. There are a total of 2 channels available on the op amps. Currently, linear amplifier is operating with a quiescent current of 600μA.
AD706JRZ Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
AD706JRZ Applications
There are a lot of Analog Devices Inc. AD706JRZ Instrumentational OP Amps applications.
- Wireless base stations
- Communication
- Video computer boards
- Portable media players
- Fast A/D and D/A converters
- Signal amplification
- Cinema or auditorium audio system
- High speed sample
- Test equipment
- Television
