AD708BQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | AD708 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 12.5mA |
| Max Supply Current | 5.5mA |
| Quiescent Current | 2.75mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Output Current per Channel | 12.5mA |
| Input Offset Voltage (Vos) | 30μV |
| Bandwidth | 900 kHz |
| Gain Bandwidth Product | 900 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5μV |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Dual Supply Voltage | 15V |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD708BQ Overview
There is a 8-CDIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 30μV. This electronic component is recommended to be mounted using the mounting type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 5.5mA. 140dB should be the voltage gain. There are 2 channels on the operational amplifiers. Buffer amplifier has a quiescent current of 2.75mA.
AD708BQ Features
8 Pins
supply voltage of 15V
140dB voltage gain
AD708BQ Applications
There are a lot of Analog Devices Inc. AD708BQ Instrumentational OP Amps applications.
- Instrumentation
- Logarithmic operation circuits
- Automation control systems
- Home audio systems
- Radar
- Laptop
- Voltage regulation circuit
- Fission chambers
- Biopotential
- Oscilloscopes
