AD708SQ/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD708 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 12.5mA |
| Quiescent Current | 2.75mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Output Current per Channel | 12.5mA |
| Input Offset Voltage (Vos) | 30μV |
| Bandwidth | 900 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5μV |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Dual Supply Voltage | 15V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD708SQ/883B Overview
The linear amplifier is packaged in a 8-CDIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 30μV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . The buffer amplifier is capable of operating from a supply current of 5.5mA . It is a member of the 140dB's 140dB family. 2 elements make up the design of this buffer amplifier. Military, MIL-STD-883 is the number that corresponds to the series of the buffer op amp. The quiescent current is 2.75mA.
AD708SQ/883B Features
8 Pins
supply voltage of 15V
140dB voltage gain
AD708SQ/883B Applications
There are a lot of Analog Devices Inc. AD708SQ/883B Instrumentational OP Amps applications.
- Thermocouples
- High/low-pass filter circuit
- Automatic control
- Car stereo
- Computer workstations
- Ultrasound transducers
- High input resistance broadband
- Multiplication circuits
- Active probe
- Precision measurement
