banner_page

AD711JRZ-REEL

1 Channels 25mA per Channel 15pA 88 dB Instrumentational OP Amps 9V~36V ±4.5V~18V AD711 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD711JRZ-REEL
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 476
  • Description: 1 Channels 25mA per Channel 15pA 88 dB Instrumentational OP Amps 9V~36V ±4.5V~18V AD711 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Dual Supply Voltage 15V
Input Capacitance 5.5pF
Input Offset Current-Max (IIO) 0.0006μA
Input Voltage Noise Density 45nV/sqrt Hz
Height 1.5mm
Length 5mm
Width 4mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Max Power Dissipation 500mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD711
Pin Count 8
Qualification Status Not Qualified
Number of Channels 1
Operating Supply Current 2.8mA
Power Dissipation 500mW
Quiescent Current 2.8mA
Supply Current-Max 3.4mA
Slew Rate 20V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 88 dB
Current - Input Bias 15pA
Voltage - Supply, Single/Dual (±) 9V~36V ±4.5V~18V
Output Current per Channel 25mA
Input Offset Voltage (Vos) 1mV
Gain Bandwidth Product 4MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 4000 kHz
Voltage Gain 112.04dB
Power Supply Rejection Ratio (PSRR) 110dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 300μV
Settling Time 1 μs
Low-Bias YES

AD711JRZ-REEL Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. Op amp ic rates 1mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using a supply current of 2.8mA , this buffer op amp will be able to operate. 112.04dB should be the voltage gain. Op amp ic has 1 channels. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Currently, linear amplifier is operating with a quiescent current of 2.8mA.

AD711JRZ-REEL Features


8 Pins
supply voltage of 15V
112.04dB voltage gain

AD711JRZ-REEL Applications


There are a lot of Analog Devices Inc. AD711JRZ-REEL Instrumentational OP Amps applications.

  • Oscilloscopes
  • Television
  • High input resistance broadband
  • Fission chambers
  • MP3
  • pH (acidity)
  • Power transmission
  • Proportional counter tubes
  • Signal filtering
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good