AD7124-8BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | PGA, Temperature Sensor |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7124 |
| Pin Count | 32 |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-PGA-ADC |
| Interface | SPI |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 5.6mA |
| Number of Bits | 24 |
| Quiescent Current | 2.8mA |
| Input Type | Differential, Pseudo-Differential, Single Ended |
| Slew Rate | 20 V/μs |
| Architecture | Sigma-Delta |
| Common Mode Rejection Ratio | 76 dB |
| Number of Inputs | 8, 15, 16 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Input Offset Voltage (Vos) | 1mV |
| Data Interface | SPI, DSP |
| Resolution | 3 B |
| Sampling Rate | 19.2 ksps |
| Voltage - Supply, Analog | ±1.8V 2.7V~3.6V |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Settling Time | 1 μs |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 19.2k |
| Output Bit Code | OFFSET BINARY |
| Number of A/D Converters | 1 |
| Dual Supply Voltage | 1.8V |
| Input Capacitance | 5.5pF |
| Output Format | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7124-8BCPZ-RL7 Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 32-WFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 8 channels.The is equipped with 32 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 19.2k Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 32 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±1.8V 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to AD7124 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital describes the type of supply.The supply/digital voltage of this electrical AD converter is 1.65V~3.6V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 3.6V.8, 15, 16 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA, Temperature Sensor can be ensured when operating.The dual supply type of this electronic AD converter is 1.8V.This DC DC switching regulator operates from a supply current of 5.6mA.
AD7124-8BCPZ-RL7 Features
1 Functions
32 basic kinds of terminations
32 pin count
Minimal supply voltage of 2.7V
AD7124-8BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD7124-8BCPZ-RL7 ADC applications.
- Multiplexed Data Acquisition Systems
- TD-SCDMA, WiMAX
- Displaying
- 4-channel data acquisition
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Uninterrupted Power Supplies
- Wireless local loop
- Spectrum Analysis
- Medical Instrumentation and medical imaging
- Automotive
