AD712JRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD712 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 5.6mA |
| Quiescent Current | 2.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 112.04dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 5.5pF |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD712JRZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 5.6mA . 112.04dB should remain the voltage gain. The op amp ic has 2 channels on it. As a result of this, the buffer amplifier is packed in TAPE AND REEL. The current is quiescent at 2.8mA.
AD712JRZ-REEL Features
8 Pins
supply voltage of 15V
112.04dB voltage gain
AD712JRZ-REEL Applications
There are a lot of Analog Devices Inc. AD712JRZ-REEL Instrumentational OP Amps applications.
- Active probe
- Computer workstations
- Radar
- Automation control systems
- Power control
- Navigation
- Mobile phone
- ECG equipment
- Exponential operation circuits
- Scintillation detectors
