banner_page

AD712KRZ-REEL7

2 Channels 25mA per Channel 20pA 88 dB Instrumentational OP Amps ±4.5V~18V AD712 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD712KRZ-REEL7
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 827
  • Description: 2 Channels 25mA per Channel 20pA 88 dB Instrumentational OP Amps ±4.5V~18V AD712 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD712
Pin Count 8
Qualification Status Not Qualified
Number of Channels 2
Operating Supply Current 5.6mA
Quiescent Current 2.8mA
Slew Rate 20V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 88 dB
Current - Input Bias 20pA
Voltage - Supply, Single/Dual (±) ±4.5V~18V
Output Current per Channel 25mA
Input Offset Voltage (Vos) 1mV
Gain Bandwidth Product 4MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 4000 kHz
Voltage Gain 112.04dB
Power Supply Rejection Ratio (PSRR) 95dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 200μV
Settling Time 1 μs
Low-Bias YES
Bias Current-Max (IIB) @25C 0.000075μA
Dual Supply Voltage 15V
Input Capacitance 5.5pF
Input Offset Current-Max (IIO) 0.0006μA
Input Voltage Noise Density 45nV/sqrt Hz
Height Seated (Max) 1.75mm
Length 4.9mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD712KRZ-REEL7 Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a J-FET type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. Op amp rates 1mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 5.6mA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 112.04dB is the best course of action. The op amp ic has 2 channels on it. This linear amplifier pack is based on the TAPE AND REEL axis. The quiescent current is 2.8mA.

AD712KRZ-REEL7 Features


8 Pins
supply voltage of 15V
112.04dB voltage gain

AD712KRZ-REEL7 Applications


There are a lot of Analog Devices Inc. AD712KRZ-REEL7 Instrumentational OP Amps applications.

  • Blood pressure sensors
  • Communication device
  • Portable docking station
  • earphone
  • Large motor controllers
  • Logarithmic operation circuits
  • Proportional counter tubes
  • E-book readers
  • Television broadcasting equipment
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good