Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIFET |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
AD713 |
Pin Count |
14 |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Operating Supply Current |
12mA |
Nominal Supply Current |
10mA |
Quiescent Current |
3mA |
Slew Rate |
20V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
88 dB |
Current - Input Bias |
55pA |
Voltage - Supply, Single/Dual (±) |
9V~36V ±4.5V~18V |
Output Current per Channel |
25mA |
Input Offset Voltage (Vos) |
1.5mV |
Bandwidth |
4MHz |
Gain Bandwidth Product |
4MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
112.04dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Power Supply Rejection Ratio (PSRR) |
95dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
300μV |
Settling Time |
1 μs |
Low-Bias |
YES |
Bias Current-Max (IIB) @25C |
0.0002μA |
Dual Supply Voltage |
15V |
Input Capacitance |
5.5pF |
Input Offset Current-Max (IIO) |
0.0017μA |
Input Voltage Noise Density |
45nV/sqrt Hz |
Height |
3.3mm |
Length |
19.05mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD713JNZ Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. An op amp ic of the J-FET type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 12mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 112.04dB for the time being. The op amp ic has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage. The current is quiescent at 3mA.
AD713JNZ Features
14 Pins
supply voltage of 15V
112.04dB voltage gain
AD713JNZ Applications
There are a lot of Analog Devices Inc. AD713JNZ Instrumentational OP Amps applications.
- Instrumentation
- High input resistance broadband
- Power transmission
- Precision measurement
- Switching amplifier
- PDA
- Power generator
- Logarithmic operation circuits
- Home audio systems
- Laptop