AD713JR-16-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD713 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 12mA |
| Quiescent Current | 3mA |
| Supply Current-Max | 13.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 55pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 300μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 5.5pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0017μA |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD713JR-16-REEL Overview
In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. Buffer amps of this type are called J-FET-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 16. A total of 16 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 16 pins on it. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using a supply current of 12mA , this buffer op amp will be able to operate. 112.04dB should remain the voltage gain. On the buffer amps, there are 4 channels that can be used. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. There is an 3mA quiescent current running through op amp ic.
AD713JR-16-REEL Features
16 Pins
supply voltage of 15V
112.04dB voltage gain
AD713JR-16-REEL Applications
There are a lot of Analog Devices Inc. AD713JR-16-REEL Instrumentational OP Amps applications.
- High input resistance broadband
- Communication device
- Integrator circuits
- Voltage regulation circuit
- Video conversion and routing
- Information processing
- Broadcasting
- Car stereo
- Hand-held batteries
- Video amplifiers
