AD713JRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD713 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Operating Supply Current | 12mA |
| Quiescent Current | 3mA |
| Supply Current-Max | 13.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 55pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 300μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 5.5pF |
| Input Offset Current-Max (IIO) | 0.0017μA |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD713JRZ-16 Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 16. In this case, there are 16 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this op amp is a type of Operational Amplifier device. It has 16 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . You can run this op amp ic on 12mA . 112.04dB should remain the voltage gain. Op amp ic has 4 channels. The operating supply voltage of instrumentation amplifier is rated 9V voltage. Buffer amplifier has a quiescent current of 3mA.
AD713JRZ-16 Features
16 Pins
supply voltage of 15V
112.04dB voltage gain
AD713JRZ-16 Applications
There are a lot of Analog Devices Inc. AD713JRZ-16 Instrumentational OP Amps applications.
- Active probe
- Laptop
- Commercial audio systems
- Radiation thermometry transducers
- Industrial control system
- Switching amplifier
- Proportional counter tubes
- High speed sample
- Fast A/D and D/A converters
- Non-polarized electrodes
