AD745JRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.2W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD745 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Operating Supply Current | 10mA |
| Power Dissipation | 1.2W |
| Quiescent Current | 10mA |
| Slew Rate | 12.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 9.6V~36V ±4.8V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 250μV |
| Settling Time | 5 μs |
| Low-Bias | YES |
| Max Frequency | 120MHz |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 18pF |
| Input Voltage Noise Density | 5.5nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD745JRZ-16 Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the J-FET-type. Linear amplifier is delivered in a Tube case. It is estimated that there will be 16 terminations in the next few months. Buffer amplifier has a total of 16 pins on it. Please take in mind that op amp should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 16 pins. The input offset voltage is 500μV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 10mA. 132.04dB should be the voltage gain. There are 1 channels on the operational amplifiers. The current is quiescent at 10mA.
AD745JRZ-16 Features
16 Pins
supply voltage of 15V
132.04dB voltage gain
AD745JRZ-16 Applications
There are a lot of Analog Devices Inc. AD745JRZ-16 Instrumentational OP Amps applications.
- Automotive sensors
- Vehicle electronics
- Navigation
- Switching amplifier
- Car stereo
- Power transmission
- ECG equipment
- Exponential operation circuits
- Broadcasting
- Voltage regulation circuit
