AD745KRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.2W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD745 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 10mA |
| Power Dissipation | 1.2W |
| Quiescent Current | 10mA |
| Slew Rate | 12.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 9.6V~36V ±4.8V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 100μV |
| Settling Time | 5 μs |
| Low-Bias | YES |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 18pF |
| Input Voltage Noise Density | 5.5nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD745KRZ-16 Overview
A 16-SOIC (0.295, 7.50mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 16h termination of the year. A total of 16 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 16 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 2μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . As long as the supply current of the chip does not exceed 10mA, this op amp ic can operate. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. There is an 10mA quiescent current running through op amp ic.
AD745KRZ-16 Features
16 Pins
supply voltage of 15V
132.04dB voltage gain
AD745KRZ-16 Applications
There are a lot of Analog Devices Inc. AD745KRZ-16 Instrumentational OP Amps applications.
- Test and measurement instruments
- Medical instruments
- Video computer boards
- High speed sample
- Television
- Power transmission
- Signal operation
- Automation control systems
- Signal amplification
- Car stereo
