AD7503JNZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD7503 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 800μA |
| Power Dissipation | 450mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| On-state Resistance Match-Nom | 6.8Ohm |
| Switch Time (Ton, Toff) (Max) | 800ns, 800ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 12 Ω |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7503JNZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The electronic part body is injected with 16 pins. A 1 circuit is present in this switch device. Using the AD7503 search parameter, you can discover variants of the switch. A 300Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. There is no problem with using dual supply voltage, but it should not exceed 17V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. It is possible to operate 8 inputs.
AD7503JNZ Features
8 Channels
AD7503JNZ Applications
There are a lot of Analog Devices Inc. AD7503JNZ Analog Switches & Multiplexers ICs applications.
- Imaging
- PBXs
- Switching Systems
- Medical systems
- Low-Voltage
- Signal routing between systems
- New designs requiring multiplexer functions
- Avionics
- Avionics test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
