AD7503JQ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD7503 |
| Pin Count | 16 |
| Temperature Grade | OTHER |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 450mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| On-state Resistance Match-Nom | 6.8Ohm |
| Switch Time (Ton, Toff) (Max) | 800ns, 800ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 12 Ω |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD7503JQ Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 8:1. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. Try searching with AD7503 if you're looking for variants. The internal resistance of this digital multiplexer is 300Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 17V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There are 8 inputs to be operated. Temperatures higher than 70°C are not recommended for operation of the analogue multiplexer.
AD7503JQ Features
8 Channels
AD7503JQ Applications
There are a lot of Analog Devices Inc. AD7503JQ Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Cellular phones
- Fiber In The Loop (FITL)
- Audio and video routing
- Data switching
- CSU
- PDAs
- Remote wireless modules
- Power routing
- Intelligent PBX
