AD7503KNZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD7503 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 800μA |
| Power Dissipation | 450mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| On-state Resistance Match-Nom | 6.8Ohm |
| Switch Time (Ton, Toff) (Max) | 800ns, 800ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 12 Ω |
| Drain to Source Resistance | 170Ohm |
| Signal Current-Max | 0.035A |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7503KNZ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature around 0°C~70°C TA extended. 16 terminations have been made so far. Due to its 8 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with AD7503. There is 300Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 15V voltage to the switch device. Despite this switch's dual supply capability, its voltage should not exceed 17V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. It is possible to operate 8 inputs. Drain to Source resistance is 170Ohm.
AD7503KNZ Features
8 Channels
Drain-to-Source resistance: 170Ohm
AD7503KNZ Applications
There are a lot of Analog Devices Inc. AD7503KNZ Analog Switches & Multiplexers ICs applications.
- FTTH
- Audio and video switching
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Communication systems
- Communications systems
- MP3 players
- PDAs
- Data Acquisition Systems
- Medical Instrumentation
- Medical systems
