AD7506JNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 30mW |
| Base Part Number | AD7506 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 300μA |
| Power Dissipation | 30mW |
| Number of Inputs | 16 |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Channel Capacitance (CS(off), CD(off)) | 5pF 40pF |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 18 Ω |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 4.95mm |
| Length | 39.7mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7506JNZ Overview
The electronic component is convenient to ship overseas because it is packed in a 28-DIP (0.600, 15.24mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 16:1. The operating temperature is extended to around 0°C~70°C TA. An injection of 28 pins is performed into the body of the electrical component. There are 1 circuits in this multiplexer. Try searching with AD7506 if you're looking for variants. It has an internal resistance of 300Ohm. For functions related to 28 pins, please refer to the datasheets. If put voltage greater than 17V on the multiplexer, damage may be caused to the device. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. This electrical part is compatible with 15V operating voltages. Operating the 16 inputs requires 16 inputs.
AD7506JNZ Features
AD7506JNZ Applications
There are a lot of Analog Devices Inc. AD7506JNZ Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Microprocessor controlled systems
- 65 V DACs
- Communications systems
- Digital access cross connects
- Avionics and Military Systems
- Isolation
- Medical Instrumentation
- Industrial control systems
- Sample hold systems
