AD7506JQ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-CDIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 450Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD7506 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Channel Capacitance (CS(off), CD(off)) | 5pF 40pF |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 18 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
AD7506JQ Overview
As the electronic part is packed in 28-CDIP (0.600, 15.24mm), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. There is 16:1 ratio between the number of multiplexers and demultiplexers. Around -25°C~85°C TA is the extended operating temperature. Total terminations are 28. This electronic part offers high-quality output due to its 16 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 1 circuits in this switch device. Try searching with AD7506 to find analog multiplexer variants. This digital multiplexer has 450Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Despite this switch's dual supply capability, its voltage should not exceed 17V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
AD7506JQ Features
16 Channels
AD7506JQ Applications
There are a lot of Analog Devices Inc. AD7506JQ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- High-Voltage
- SONET/SDH ADM
- Battery Powered Instruments
- SDH
- Wireless Local Loop
- E1 Network Equipment
- Communications systems
- PCMCIA cards
- ISDN NT1/TA
