Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
28-DIP (0.600, 15.24mm) |
Number of Pins |
28 |
Supplier Device Package |
28-PDIP |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Through Hole |
Resistance |
300Ohm |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Max Power Dissipation |
1W |
Base Part Number |
AD7506 |
Number of Outputs |
1 |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
15V |
Nominal Supply Current |
300μA |
Power Dissipation |
30mW |
Number of Inputs |
16 |
Turn-Off Delay Time |
1 μs |
Max Dual Supply Voltage |
17V |
On-State Resistance (Max) |
450Ohm |
High Level Output Current |
20mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 40pF |
Switch Time (Ton, Toff) (Max) |
1.5μs, 1μs |
Channel-to-Channel Matching (ΔRon) |
18Ohm |
Drain to Source Resistance |
450Ohm |
Voltage - Supply, Dual (V±) |
±15V |
Height |
4.95mm |
Length |
39.7mm |
Width |
14.73mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD7506KNZ Overview
Shipping overseas is convenient with the electronic component packed in 28-DIP (0.600, 15.24mm). In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. The electronic part delivers high-quality output through its 1 channels. There are 1 circuits in this switch device. Use AD7506 to search for variants of the digital switches. Analog switches have 300Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. Users should never supply a voltage higher than 15V to a switch device. There is no problem with using dual supply voltage, but it should not exceed 17V. The 16 inputs need to be operated in order to work. During operation, the multiplexer should not be exposed to a temperature above 125°C. It has a Drain to Source resistance of 450Ohm ohms. The analog switch ics includes 1 outputs. It is possible to purchase a 28-PDIP package from suppliers.
AD7506KNZ Features
1 Channels
Drain-to-Source resistance: 450Ohm
AD7506KNZ Applications
There are a lot of Analog Devices Inc. AD7506KNZ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Routers
- Video signal routing
- High-Voltage
- Channel Banks
- Automotive applications
- Remote Powered Equipment
- USB 1.1 signal switching circuits
- SONET/SDH ADM
- Fiber to the Home