AD7511DIJNZ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | AD7511 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Interface | Parallel |
| Power Dissipation | 24mW |
| Max Supply Current | 800μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 350 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 180 ns |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Channel Capacitance (CS(off), CD(off)) | 8pF 1pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 180ns, 350ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7511DIJNZ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. 16 terminations have been made so far. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A SPST - NC switching circuit is used to build these analog multiplexers. Using the AD7511 search parameter, you can discover variants of the switch. A 100Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Analogue multiplexer with a Dual supply type that is cost-effective. A voltage higher than 800μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 17V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A voltage of 15V can be used to operate the electronic component. Check out the electrical component's additional features, such as the following: OVERVOLTAGE PROTECTION.
AD7511DIJNZ Features
4 Channels
Switch Circuit: SPST - NC
Additional Features: OVERVOLTAGE PROTECTION
AD7511DIJNZ Applications
There are a lot of Analog Devices Inc. AD7511DIJNZ Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Audio and video routing
- Automatic test equipment
- Avionics test equipment
- Audio signal routing
- Fiber In The Loop (FITL)
- Private Branch Exchange (PBX)
- Cable Modem
- Industrial control systems
- Video switching
