Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-CDIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Tin/Lead (Sn63Pb37) |
Additional Feature |
OVERVOLTAGE PROTECTION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
4 |
Supply Voltage |
15V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
AD7511 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Interface |
Parallel |
Power Dissipation |
24mW |
Max Supply Current |
800μA |
Throw Configuration |
SPST |
Turn On Delay Time |
350 ns |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
180 ns |
Max Dual Supply Voltage |
17V |
On-State Resistance (Max) |
100Ohm |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
8pF 1pF |
On-state Resistance Match-Nom |
0.75Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
180ns, 350ns (Typ) |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Voltage - Supply, Dual (V±) |
±15V |
Height |
4.14mm |
Length |
19.81mm |
Width |
6.89mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD7511DIKQ Overview
Shipping overseas is convenient with the electronic component packed in 16-CDIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -25°C~85°C TA. In total, there have been 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPST - NC switching circuit is used for these analog switches. If you are looking for variants of the digital switch, trying search with AD7511. There is 100Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An effective Dual supply digital multiplexer. A digital multiplexer may suffer damage if voltage is applied above 800μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 17V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 15V operating voltages can be used with this electrical part. Additional features of the electronic component include: OVERVOLTAGE PROTECTION.
AD7511DIKQ Features
4 Channels
Switch Circuit: SPST - NC
Additional Features: OVERVOLTAGE PROTECTION
AD7511DIKQ Applications
There are a lot of Analog Devices Inc. AD7511DIKQ Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Microwave transmission systems
- Audio and video signal routing
- CSU
- High-Voltage
- Private Branch Exchange (PBX)
- Medical Instrumentation
- High speed data transmission line cards
- PBXs
- MP3 players