AD7511DISQ/883B
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD7511 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Interface | Parallel |
| Power Dissipation | 24mW |
| Max Supply Current | 800μA |
| Turn On Delay Time | 1 μs |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 17V |
| On-State Resistance (Max) | 100Ohm |
| Screening Level | MIL-STD-883 Class B |
| High Level Output Current | 50mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 1pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 350ns, 180ns (Typ) |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.08mm |
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD7511DISQ/883B Overview
The electronic component is convenient to ship overseas because it is packed in a 16-CDIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -55°C~125°C. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SPST - NC switching circuits. Try searching with AD7511 to find analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Digital switch that provides Dual power at a cost-effective price. If you put voltage higher than 800μA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 17V. 15V operating voltages are supported by the electronic component. A 4 input needs to be operated. Additional features include: OVERVOLTAGE PROTECTION.
AD7511DISQ/883B Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: OVERVOLTAGE PROTECTION
AD7511DISQ/883B Applications
There are a lot of Analog Devices Inc. AD7511DISQ/883B Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Sample-and-hold systems
- SONET/SDH ADM
- Transmit
- Precision data acquisition
- Automotive applications
- Optical Applications
- E1 Multiplexer
- Relay Replacement
- Medical
