AD7674ASTZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | PulSAR® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 138mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7674 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 16mA |
| Power Dissipation | 138mW |
| Number of Bits | 18 |
| Input Type | Differential |
| Min Input Voltage | 3V |
| Architecture | SAR |
| Max Input Voltage | 5.35V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | SPI, Parallel, DSP |
| Resolution | 2.25 B |
| Sampling Rate | 800 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 800k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 126mW |
| Integral Nonlinearity (INL) | 2.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL, PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 101 dB |
| Differential Nonlinearity | -1 LSB |
| Height | 1.4mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7674ASTZ Overview
The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 48-LQFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 800k Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7674 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL, PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 138mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 138mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 5.35V.The digital converter supports the minimal input voltage of 3V.It is a type of FPGA belonging to the PulSAR? series.
AD7674ASTZ Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 4.75V
PulSAR? series
AD7674ASTZ Applications
There are a lot of Analog Devices Inc. AD7674ASTZ ADC applications.
- High Speed Data Acquisition
- Spectrum Analysis
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Music reproduction technology
- Medical Imaging
- Automotive
- Handheld Terminal Interface
- Cell Phones
- Micro and pico cell systems, software radios
- Music recording
