AD7680ARMZ

16 Bit 0.65mm Tin ADC PulSAR? Series AD7680 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD7680ARMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 313
Description: 16 Bit 0.65mm Tin ADC PulSAR? Series AD7680 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	PulSAR®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Analog to Digital Converters
Max Power Dissipation	26.4mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD7680
Pin Count	8
Operating Supply Voltage	5V
Polarity	Unipolar
Configuration	S/H-ADC
Number of Channels	1
Interface	SPI
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Power Dissipation	26.4mW
Number of Bits	16
Input Type	Single Ended
Min Input Voltage	2.5V
Architecture	SAR
Max Input Voltage	5.25V
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Supply Type	Single
Reference Type	Supply
Data Interface	SPI, DSP
Resolution	2 B
Sampling Rate	100 ksps
Voltage - Supply, Analog	2.5V~5.5V
Voltage - Supply, Digital	2.5V~5.5V
Number of Analog In Channels	1
Sampling Rate (Per Second)	100k
Output Bit Code	BINARY
Linearity Error-Max (EL)	0.0053%
Integral Nonlinearity (INL)	4 LSB
Sample and Hold / Track and Hold	TRACK
Ratio - S/H:ADC	1:1
Output Format	SERIAL
Signal to Noise Ratio (SNR)	86 dB
Conversion Time-Max	9.6μs
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD7680ARMZ Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.6V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.5V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7680 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.5V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 26.4mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 26.4mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 5.25V.The digital converter supports the minimal input voltage of 2.5V.It is a type of FPGA belonging to the PulSAR? series.