AD7709ARU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | PGA |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Other Converters |
| Max Power Dissipation | 8.8mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7709 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | MUX-PGA-ADC |
| Number of Channels | 4 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 3.75mW |
| Number of Bits | 16 |
| Input Type | Differential, Pseudo-Differential |
| Architecture | Sigma-Delta |
| Number of Inputs | 2, 4 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI, DSP |
| Resolution | 2 B |
| Sampling Rate | 105 sps |
| Voltage - Supply, Analog | 2.7V~3.3V 5V |
| Voltage - Supply, Digital | 2.7V~3.3V 5V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 105 |
| Output Bit Code | BINARY, OFFSET BINARY |
| Linearity Error-Max (EL) | 0.003% |
| Number of A/D Converters | 1 |
| Analog Input Voltage-Max | 2.56V |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 126 dB |
| Analog Input Voltage-Min | -2.56V |
| Length | 7.8mm |
| RoHS Status | Non-RoHS Compliant |
AD7709ARU Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 24-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 4 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 105 Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.3V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.It belongs to AD7709 family.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~3.3V 5V.The ADC converter operates with the maximal supply voltage of 5.25V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 2.56V.The ADC converter operates from 3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 3.75mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 8.8mW.The number of channels is growing strong/weak: 4.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -2.56V.PGA can be ensured when operating.
AD7709ARU Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
AD7709ARU Applications
There are a lot of Analog Devices Inc. AD7709ARU ADC applications.
- Multiplexed Data Acquisition Systems
- Transducer
- Imaging Systems
- TD-SCDMA, WiMAX
- CMOS Image sensors for mobile applications
- Wireless and wired broadband communications
- Broadband data applications
- Cell Phones
- Battery Operated Systems
- Displaying
