AD7711ANZ
| Parameters | |
|---|---|
| Min Dual Supply Voltage | 4.75V |
| Dual Supply Voltage | 5V |
| Input Capacitance | 11.5pF |
| Number of Converters | 1 |
| Signal to Noise Ratio (SNR) | 137 dB |
| Negative Supply Voltage-Nom | -5V |
| Height | 3.3mm |
| Length | 31.75mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | PGA |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 52.5mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD7711 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-PGA-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 53mW |
| Number of Bits | 24 |
| Input Type | Differential |
| Min Input Voltage | 2.5V |
| Architecture | Sigma-Delta |
| Number of Inputs | 2 |
| Max Input Voltage | 5V |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Dual, Single |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 3 B |
| Sampling Rate | 19.5 ksps |
| Voltage - Supply, Analog | 5V~10V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 1k |
| Output Bit Code | BINARY, OFFSET BINARY |
| Power Consumption | 30mW |
| Linearity Error-Max (EL) | 0.003% |
AD7711ANZ Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 24-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 1k Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.The supply/analog voltage of this electrical ADC converter is 5V~10V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7711 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Dual, Single.Mounting the ADC converter is possible with Through Hole.The ADC converter operates with the maximal supply voltage of 10.5V.2 inputs are employed.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 10V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 53mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 52.5mW.There are 1 converters, which will convert numbers to words and figures to words. PGA can be ensured when operating.The maximal input type of this electronic AD converter is 5V.The digital converter supports the minimal input voltage of 2.5V.The dual supply type of this electronic AD converter is 5V.It operates with the minimal dual supply voltage of 4.75V.
AD7711ANZ Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
AD7711ANZ Applications
There are a lot of Analog Devices Inc. AD7711ANZ ADC applications.
- Spectrum Analysis
- Uninterrupted Power Supplies
- Communication test equipment
- Music reproduction technology
- Transducer
- Displaying
- Rotary encoder
- CMOS Image sensors for mobile applications
- Digital Storage Oscilloscope
- Digital signal processing
