AD7812YR-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7812 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 8 |
| Number of Bits | 10 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 7, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External, Internal |
| Data Interface | DSP |
| Resolution | 1.25 B |
| Sampling Rate | 350 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 350k |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0977% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 3.6V |
| Output Format | SERIAL |
| Conversion Time-Max | 2.3μs |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
AD7812YR-REEL7 Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~105°C.The number of samples of audio recorded every second is 350k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7812 family.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.7, 8 inputs are employed.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 3.6V.The ADC converter operates from 3/5V power supplies.The number of channels is growing strong/weak: 8.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
AD7812YR-REEL7 Features
1 Functions
20 basic kinds of terminations
20 pin count
3/5V power supplies
AD7812YR-REEL7 Applications
There are a lot of Analog Devices Inc. AD7812YR-REEL7 ADC applications.
- Battery Operated Systems
- Digital Storage Oscilloscope
- Smart antenna systems
- Displaying
- Medical Imaging
- RADAR processing, digital oscilloscopes
- Scientific instruments
- High Speed Data Acquisition for PCs
- Multicarrier, multimode digital receivers
- Instrumentation and test equipment
