AD7822BRZ
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 60mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7822 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 60mW |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Min Input Voltage | 2.45V |
| Architecture | Pipelined |
| Max Input Voltage | 2.55V |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 2 Msps |
| Voltage - Supply, Analog | 2.7V~3.3V 5V |
| Voltage - Supply, Digital | 2.7V~3.3V 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 2M |
| Output Bit Code | BINARY |
| Power Consumption | 24mW |
| Linearity Error-Max (EL) | 0.293% |
| Integral Nonlinearity (INL) | 0.75 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Input Capacitance | 15pF |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 48 dB |
| Differential Nonlinearity | 0.75 LSB |
| Conversion Time-Max | 0.42μs |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
AD7822BRZ Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 2M Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.3V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7822 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.3V 5V.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 60mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 60mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 2.55V.The digital converter supports the minimal input voltage of 2.45V.
AD7822BRZ Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 2.7V
AD7822BRZ Applications
There are a lot of Analog Devices Inc. AD7822BRZ ADC applications.
- Industrial Process Control
- 3-phase power control
- Communication test equipment
- Battery Operated Systems
- Multiplexed Data Acquisition Systems
- Communication Systems
- Music reproduction technology
- Broadband data applications
- Audio/Video devices
- Displaying
