AD7853ANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD7853 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Bipolar, Unipolar |
| Configuration | S/H-ADC |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation | 33mW |
| Number of Bits | 12 |
| Input Type | Pseudo-Differential |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 3V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Conversion Time-Max | 4.6μs |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AD7853ANZ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 24-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7853 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 3V~5.5V.There is a possibility of mounting the analogue to digital converter by using the Through Hole axis.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 3V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 33mW.The ADC converter consists of 1 elements.
AD7853ANZ Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 3V
1 elements
AD7853ANZ Applications
There are a lot of Analog Devices Inc. AD7853ANZ ADC applications.
- Imaging Systems
- Handheld Terminal Interface
- 3-phase power control
- Digital signal processing
- Data Acquisition Systems
- Digital beam-forming systems for ultrasound
- 4-channel data acquisition
- AC motor control
- CMOS Image sensors for mobile applications
- Communications
