AD7875KNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 95mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD7875 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Polarity | Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | 2-Wire, Parallel, SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 95mW |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Max Input Voltage | 5V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Dual |
| Reference Type | Internal |
| Data Interface | SPI, Parallel |
| Resolution | 1.5 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | ±5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 100k |
| Max Dual Supply Voltage | 5.25V |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 60mW |
| Integral Nonlinearity (INL) | 1 LSB |
| Min Dual Supply Voltage | 4.75V |
| Sample and Hold / Track and Hold | TRACK |
| Dual Supply Voltage | 5V |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL, PARALLEL, 8 BITS, PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 72 dB |
| Negative Supply Voltage-Nom | -5V |
| Differential Nonlinearity | 1 LSB |
| Conversion Time-Max | 9μs |
| Height | 4.95mm |
| Length | 32.51mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7875KNZ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 24-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7875 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Dual.Through Hole is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL, PARALLEL, 8 BITS, PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 95mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 95mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 5V.The dual supply type of this electronic AD converter is 5V.It operates with the maximal dual supply voltage of 5.25V.It operates with the minimal dual supply voltage of 4.75V.
AD7875KNZ Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
AD7875KNZ Applications
There are a lot of Analog Devices Inc. AD7875KNZ ADC applications.
- Music recording
- Data Acquisition Systems
- Telecommunications
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Multicarrier, multimode digital receivers
- Microcontrollers.
- Displaying
- Communications
- Battery Operated Systems
- Wireless and wired broadband communications
