AD790JN
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD790 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Dissipation | 250mW |
| Max Supply Current | 12mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 45 ns |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~7V ±2.25V~16.5V |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| Hysteresis | 500μV |
| CMRR, PSRR (Typ) | 95dB CMRR, 90dB PSRR |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 242mW |
| Technology | BIPOLAR |
AD790JN Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .Output type CMOS, TTL is used for this comparator.The part will be shipped by Tube .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 15V voltage.It's a typical with Latch comparator.Currently, it consists of only 1 elements.The device includes 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.This comparator has 8 pins.You can search AD790 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 10mA .Current supply exceeding 12mA could cause disfunction of the compartator.In order to operate normally, a supply voltage of 0 is required.
AD790JN Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
AD790JN Applications
There are a lot of Analog Devices Inc. AD790JN linear comparators applications.
- Hand-Held Electronics
- Automotive
- High-Speed Sampling Circuits
- Mobile Communications
- Motor drives
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
