AD790SQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | TIN LEAD |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD790 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 8mA |
| Power Dissipation | 250mW |
| Propagation Delay | 50 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 45 ns |
| Response Time | 60 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~7V ±2.25V~16.5V |
| Output Current per Channel | 6.4mA |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| Hysteresis | 500μV |
| CMRR, PSRR (Typ) | 95dB CMRR, 90dB PSRR |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD790SQ Overview
In order to make transportation easier, it is packaged in 8-CDIP (0.300, 7.62mm) .The comparator has a type CMOS, TTL output.Ready for shipping in Tube package.The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a with Latch chip.The total number of elements is 1 .The device contains 8 pins.Through Hole universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching AD790 .There is a quiescent current of 10mA in this comparator.Normally, the nominal supply current should be 8mA .The normal operation of the system requires 5V operating voltage.
AD790SQ Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -55°C~125°C
Quiescent Current: 10mA
AD790SQ Applications
There are a lot of Analog Devices Inc. AD790SQ linear comparators applications.
- Notebooks and PDAs
- Automotive
- Metering Systems
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Window Comparators
- Mobile Communications
- Building automation
- Handheld Instruments
- Limit Comparators
