AD795JRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | FET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD795 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Quiescent Current | 1.5mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 1.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1600 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.000003μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2.2pF |
| Wideband | NO |
| Input Voltage Noise Density | 20nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 6.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD795JRZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called J-FET-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. As long as the supply current of the chip does not exceed 1.5mA, this op amp ic can operate. It is recommended to keep the voltage gain at 120dB at all times. The op amp ic has 1 channels on it. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Buffer amplifier has a quiescent current of 1.5mA.
AD795JRZ-REEL7 Features
8 Pins
supply voltage of 15V
120dB voltage gain
AD795JRZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD795JRZ-REEL7 Instrumentational OP Amps applications.
- Ultrasound transducers
- Vehicle electronics
- Measurements of Wheatstone bridge
- Multiplication circuits
- Fast A/D and D/A converters
- Instrumentation
- Industrial control system
- High-frequency data acquisition systems
- ECG equipment
- Test equipment
