AD797ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD797 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 10.5mA |
| Nominal Supply Current | 8mA |
| Quiescent Current | 10.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 250nA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 50mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 146.02dB |
| Average Bias Current-Max (IIB) | 3μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Voltage - Input Offset | 25μV |
| Settling Time | 800 ns |
| -3db Bandwidth | 8MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD797ARZ Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 40μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 10.5mA and 10 . It is recommended to keep the voltage gain at 146.02dB at all times. Op amp ic has 1 channels. The quiescent current is 10.5mA.
AD797ARZ Features
8 Pins
supply voltage of 15V
146.02dB voltage gain
AD797ARZ Applications
There are a lot of Analog Devices Inc. AD797ARZ Instrumentational OP Amps applications.
- Integrator circuits
- Band-stop filter
- Communication device
- Measurements of Wheatstone bridge
- Displayers for aircraft and air transportation control systems
- PDA
- Radar
- Ultrasound transducers
- Signal amplification
- Commercial audio systems
