AD797BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD797 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 10.5mA |
| Quiescent Current | 10.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 250nA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 50mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 146.02dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Voltage - Input Offset | 10μV |
| Settling Time | 800 ns |
| -3db Bandwidth | 8MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Input Capacitance | 5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD797BRZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 40μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 10.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. Linear amplifier has a quiescent current of 10.5mA.
AD797BRZ Features
8 Pins
supply voltage of 15V
146.02dB voltage gain
AD797BRZ Applications
There are a lot of Analog Devices Inc. AD797BRZ Instrumentational OP Amps applications.
- Multimedia playback equipment
- Automatic control
- Band-stop filter
- Integrator circuits
- Active probe
- Non-polarized electrodes
- Signal filtering
- Ultrasound transducers
- single/dual op amp sum and difference circuits
- Signal amplification
