AD797BRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD797 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 10.5mA |
| Quiescent Current | 10.5mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 50mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 40μV |
| Gain Bandwidth Product | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 146.02dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Voltage - Input Offset | 10μV |
| Settling Time | 800 ns |
| -3db Bandwidth | 8MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Input Capacitance | 5pF |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD797BRZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 40μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 10.5mA . There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier. Currently, linear amplifier is operating with a quiescent current of 10.5mA.
AD797BRZ-REEL7 Features
8 Pins
supply voltage of 15V
146.02dB voltage gain
AD797BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD797BRZ-REEL7 Instrumentational OP Amps applications.
- Broadcasting
- Biopotential
- Oscilloscopes
- Inverse/same-phase proportional circuit
- Tablets
- Addition operation circuits
- Video conversion and routing
- MP3
- Car stereo
- Multimedia playback equipment
