AD8001ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD8001 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Power Supplies | +-3/+-6V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1.3W |
| Quiescent Current | 5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5.5mV |
| Bandwidth | 880MHz |
| Gain Bandwidth Product | 795MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 25μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8001ANZ Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are Current Feedback types of amplifier on the chip. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 5.5mV. This electrical part should be mounted using type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 5mA . 1 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. The quiescent current is 5mA.
AD8001ANZ Features
8 Pins
supply voltage of 5V
AD8001ANZ Applications
There are a lot of Analog Devices Inc. AD8001ANZ Instrumentational OP Amps applications.
- Industrial applications including automation
- Signal filtering
- Television
- Large motor controllers
- Digital cameras
- Radiation thermometry transducers
- Instrumentation
- Communication device
- Video amplifiers
- Navigation
