banner_page

AD8001ARTZ-REEL7

1 Channels 70mA per Channel 5μA 54 dB Instrumentational OP Amps 9V ±3V~6V AD8001 5 Pins SC-74A, SOT-753


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD8001ARTZ-REEL7
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 140
  • Description: 1 Channels 70mA per Channel 5μA 54 dB Instrumentational OP Amps 9V ±3V~6V AD8001 5 Pins SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Surface Mount YES
Number of Pins 5
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Max Power Dissipation 500mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AD8001
Pin Count 5
Operating Supply Voltage 9V
Power Supplies +-3/+-6V
Number of Channels 1
Operating Supply Current 5mA
Nominal Supply Current 5mA
Power Dissipation 500mW
Quiescent Current 5mA
Slew Rate 1200V/μs
Amplifier Type Current Feedback
Common Mode Rejection Ratio 54 dB
Current - Input Bias 5μA
Voltage - Supply, Single/Dual (±) ±3V~6V
Output Current per Channel 70mA
Input Offset Voltage (Vos) 5.5mV
Bandwidth 795MHz
Gain Bandwidth Product 795MHz
Neg Supply Voltage-Nom (Vsup) -5V
Power Supply Rejection Ratio (PSRR) 75dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6.3V
Voltage - Input Offset 2mV
Settling Time 10 ns
Low-Bias NO
Micropower NO
Programmable Power NO
Dual Supply Voltage 5V
Input Capacitance 1.5pF
Input Voltage Noise Density 2nV/sqrt Hz
Length 2.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD8001ARTZ-REEL7 Overview


In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A Current Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. A total of 5 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 5 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 5.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 5mA supply current, this operational amplifier ics can be operated. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 9V voltage. It is used TAPE AND REEL to pack the op amps. Linear amplifier has a quiescent current of 5mA.

AD8001ARTZ-REEL7 Features


5 Pins
supply voltage of 5V

AD8001ARTZ-REEL7 Applications


There are a lot of Analog Devices Inc. AD8001ARTZ-REEL7 Instrumentational OP Amps applications.

  • Blood pressure sensors
  • Strain gauges
  • Ultrasound transducers
  • Oscilloscopes
  • Large motor controllers
  • Medical instruments
  • pH (acidity)
  • MP3
  • Cinema or auditorium audio system
  • Navigation

Write a review

Note: HTML is not translated!
    Bad           Good