AD8001ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8001 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Power Supplies | +-3/+-6V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Power Dissipation | 800mW |
| Quiescent Current | 5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 5.5mV |
| Gain Bandwidth Product | 795MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 715MHz |
| Bias Current-Max (IIB) @25C | 25μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8001ARZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called Current Feedback-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 5.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5mA and 10 . There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 9V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 5mA.
AD8001ARZ-REEL7 Features
8 Pins
supply voltage of 5V
AD8001ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8001ARZ-REEL7 Instrumentational OP Amps applications.
- Industrial control system
- Automatic control
- High/low-pass filter circuit
- Inverse/same-phase proportional circuit
- Information processing
- Laptop
- Automation control systems
- Instrumentation
- Commercial audio systems
- High speed sample
