AD8002ANZ
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | AD8002 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 5.75mA |
| Power Dissipation | 1.3W |
| Output Current | 70mA |
| Quiescent Current | 11.5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 600MHz |
| Voltage Gain | 119dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8002ANZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A Current Feedback-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2mV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 10mA . There should be no change in the voltage gain. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 9V. There is an 11.5mA quiescent current in linear amplifier. Using VIDEO AMPLIFIER, you can sort the electronic part based on the type of consumer IC that is included.
AD8002ANZ Features
8 Pins
119dB voltage gain
AD8002ANZ Applications
There are a lot of Analog Devices Inc. AD8002ANZ Instrumentational OP Amps applications.
- Signal filtering
- Laptop
- Band-stop filter
- Industrial control system
- Radar
- Automatic control
- Proportional operation circuits
- Test equipment
- Multiplication circuits
- Micro signal measurement
