AD8002ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8002 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 5.75mA |
| Nominal Supply Current | 5.75mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 11.5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 600MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 119dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.6V |
| Voltage - Input Offset | 2mV |
| Settling Time | 16 ns |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8002ARZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called Current Feedback-types. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 5.75mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 119dB. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 9V. The quiescent current is 11.5mA.
AD8002ARZ Features
8 Pins
supply voltage of 5V
119dB voltage gain
AD8002ARZ Applications
There are a lot of Analog Devices Inc. AD8002ARZ Instrumentational OP Amps applications.
- PDA
- Logarithmic operation circuits
- Commercial audio systems
- Biopotential
- RF cable systems
- Cinema or auditorium audio system
- High/low-pass filter circuit
- Wireless base stations
- Signal amplification
- Addition operation circuits
