AD8004ANZ
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | AD8004 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 16mA |
| Output Current | 50mA |
| Quiescent Current | 4.25mA |
| Slew Rate | 3000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 40μA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 250MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 1dB |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 110μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Height | 3.43mm |
| Length | 16.89mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8004ANZ Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. Current Feedback-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. Op amp ic rates 1mV for input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 14mA volt supply current is needed for this linear amplifier to operate. 1dB should remain the voltage gain. Op amp ic has 4 channels. The current is quiescent at 4.25mA.
AD8004ANZ Features
14 Pins
supply voltage of 5V
1dB voltage gain
AD8004ANZ Applications
There are a lot of Analog Devices Inc. AD8004ANZ Instrumentational OP Amps applications.
- Wireless base stations
- Radar
- Portable electronic products powered by batteries
- Weighing systems
- Automatic control
- Integrator circuits
- Band-stop filter
- Digital cameras
- Industrial control system
- Medical imaging
