AD8005ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8005 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 425μA |
| Nominal Supply Current | 425μA |
| Power Dissipation | 500mW |
| Output Current | 10mA |
| Quiescent Current | 425μA |
| Slew Rate | 280V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 30mV |
| Bandwidth | 270MHz |
| Gain Bandwidth Product | 225MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8005ARTZ-REEL7 Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. The instrumentation amplifier in this picture is of the Current Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. In total, there are 5 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are located on the operational amplifiers. Op amp rates 30mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 425μA, this op amp ic can operate. 120dB should be the voltage gain. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 5V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 425μA.
AD8005ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
120dB voltage gain
AD8005ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8005ARTZ-REEL7 Instrumentational OP Amps applications.
- Commercial audio systems
- Integrator circuits
- Portable docking station
- Tablets
- High-frequency data acquisition systems
- Power transmission
- Strain gauges
- Automation control systems
- Fast A/D and D/A converters
- Comparator
