AD8005ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8005 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 425μA |
| Nominal Supply Current | 425μA |
| Power Dissipation | 750mW |
| Output Current | 10mA |
| Quiescent Current | 425μA |
| Slew Rate | 280V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 30mV |
| Gain Bandwidth Product | 225MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 270MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8005ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Current Feedback-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 30mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 425μA supply current, this operational amplifier ics can be operated. 120dB should be the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 5V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. There is a quiescent current of 425μA in this operational amplifier circuit.
AD8005ARZ-REEL Features
8 Pins
supply voltage of 5V
120dB voltage gain
AD8005ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8005ARZ-REEL Instrumentational OP Amps applications.
- Medical instruments
- Integrator circuits
- pH (acidity)
- Video conversion and routing
- Power control
- Laptop
- High gain DC amplifier
- Signal filtering
- Scintillation detectors
- Multiplication circuits
