AD8007AKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8007 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 10.2mA |
| Nominal Supply Current | 10.2mA |
| Quiescent Current | 10.2mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 59 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 130mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 650MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8007AKSZ-REEL7 Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. Current Feedback-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. In total, there are 5 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 5 pins. There is an input offset voltage of 4mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 10.2mA . 120dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of instrumentation amplifier is rated 9V voltage. As a result of this, the buffer amplifier is packed in TR. The current is quiescent at 10.2mA.
AD8007AKSZ-REEL7 Features
5 Pins
supply voltage of 5V
120dB voltage gain
AD8007AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8007AKSZ-REEL7 Instrumentational OP Amps applications.
- Test and measurement instruments
- Communication
- Radiation thermometry transducers
- Automatic control
- Multimedia playback equipment
- Polarized electrodes
- Television
- Image computer boards
- Power control
- Exponential operation circuits
