AD8007ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8007 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 10.2mA |
| Nominal Supply Current | 10.2mA |
| Quiescent Current | 10.2mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 59 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 130mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 650MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8007ARZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Current Feedback type. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 10.2mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 120dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 9V. The instrumentation amplifier is packed in the form of TAPE AND REEL. Buffer amplifier has a quiescent current of 10.2mA.
AD8007ARZ-R7 Features
8 Pins
supply voltage of 5V
120dB voltage gain
AD8007ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8007ARZ-R7 Instrumentational OP Amps applications.
- Scintillation detectors
- Precision measurement
- Car stereo
- Navigation
- Logarithmic operation circuits
- Micro signal measurement
- Signal transformation
- Television
- Signal filtering
- Switching amplifier
