AD8008ARMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8008 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 20.4mA |
| Nominal Supply Current | 20.4mA |
| Quiescent Current | 10.2mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 59 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 130mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 650MHz |
| Gain Bandwidth Product | 380MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8008ARMZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Current Feedback type op amp. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. Op amp ic rates 4mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 20.4mA, this op amp ic can operate. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 9V. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 10.2mA quiescent current in linear amplifier.
AD8008ARMZ-REEL7 Features
8 Pins
supply voltage of 5V
120dB voltage gain
AD8008ARMZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8008ARMZ-REEL7 Instrumentational OP Amps applications.
- Multimedia playback equipment
- Differentiator circuits
- High/low-pass filter circuit
- High input resistance broadband
- Cinema or auditorium audio system
- Industrial applications including automation
- Tablets
- Scintillation detectors
- Radar
- Proportional operation circuits
